RWD315

PRODUCTS / MACHINES /WHEEL DOZERS

Rhino Wheel Loaders are today’s solution to meet high performance requirments, have maximum uptime, and low cost operation. Designed to keep you competitive, these loaders let you finish the job faster and put more profit in your pocket.

 

The RWL series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior bucket control with less spillage. RWL Series electro-hydraulic implement controls and load-sensing hydraulic system with simultaneous lift and tilt capabilities offer better control with less effort.

Rhino wheel loaders saves you money by keeping operating costs to a minimum – getting more work done per unit of fuel used.

Images

Overview

Specifications

Downloads

If you`ve got maximum productivity in mind, the RWD Wheel Dozers should be at the top of your list. But it`s not just their big torque reserves thet make them such impressive performers. Joystick control provide smooth, near-effortless control. Rhino hydraulics sense the load and deliver the flow needed for smooth combined functions and fast work cycles.

Control panel provides access to critical machine info, brake and throttle pedals are conveniently positioned for maximum comfort to the operator.

Rhino cylinders offer superior strength and dent resistance deliver longer component life and reduced risk of system contamination. Rhino Cylinders and Rods are designed to allow for a variety of service / repair options.

High quality hose products mean fewer hose changes. Rhino Equipment offers a broad line of high, medium and low-pressure hoses and couplings that are engineered and tested far beyond industry standards for top performance and long life.

  • ENGINE

    Model

    Emission (optional)

    Cylinders

    Displacement L (cu. In)

    Net Power kW (Hp) @ Rated rpm

    Net Peak Torque Nm (lb-ft) @ Rated rpm

    Torque Rise

    Fuel System

    Lubrication

    Aspiration

    Air Cleaner

    Fan Drive

    Electrical System

    Batteries (2-12 volt)

    Cummins M11 or Rhino

    Tier2 (Tier3, Tier4)

    6

    11(671)

    250(335)@ 2,200 rpm

    1,674(1,235)@ 1,500 rpm

    47%

    Direct Injection

    Full-flow spin-on filter

    Turbocharged, charge air cooled

    Under-hood, dual element dry type, restriction indicator on filter housing for service

    Hydraulic driven

    24 Volts with 70 Amp alternator

    120A

  • TRANSMISSION

    Type

    Torque Converter

    Operator Interface

    Shift Modes

    Maximum Travel Speeds (with 29.5-25 tires)

    1st Gear km/h (mph)

    2nd Gear km/h (mph)

    3nd Gear km/h (mph)

    4nd Gear km/h (mph)

    Powershift

    Single-stage, 3 phase, Quad-element torque

    Steering column lever for two gears forward and one in reverse

    Manual activation (Forward: 1st and 2nd; Reverse: 1st)

    Forward               Reverse

    6.4(4.0)              6.4(4.0)

    11.9(7.4)            11.9(7.4)

    18.7(11.6)          25.9(16.1)

    37.0(23.0)                        -

  • AXLES / BRAKES

    Final Drives

    Differentials

    Rear Axel Oscillation (29.5-25 -22PR L-3)

    Service Brakes

    Parking Brake

    Heavy duty inboard-mounted planetary

    Helical bevel gear

    24 degrees (12 degrees each direction)

    Pneumatically assisted, hydraulically actuaded, four wheels disk brake

    Manually activated, drum mounted on front output shaft

  • REFILL CAPACITIES

    Fuel Tank L (gal)

    Cooling System L (gal)

    Engine Oil L (gal)

    Transmission Fluid

    Axle Oil (Front and Rear, each) L (gal)

    Hydraulic Tank L (gal)

    Brake System (Front and Rear Booster Pump, each) L (gal)

    480(127)

    55(15)

    32(8.5)

    43(11)

    51(13)

    260(69)

    2.0(0.5)

  • HYDRAULIC SYSTEM / STEERING

    Pump (Loader and Steering)

    Max. Rated Flow at 1,920 rpm L/min (gpm)

    System Relief Pressure (Loader) Mpa (psi)

    System Relief Pressure (Steering) Mpa (psi)

    Loader Controls

    Gear Pump, variable displacement, closed-center

    210(55)

    26(3,771)

    21(3,046)

    Dual-multiway valve, joystick control

  • STEERING

    Type

    Articulation Angle

    Turning Radius (measured to centerline of outside tire) mm (ft)

    Articulated frame, fully hydraulic

    40 degrees

    6,614(21.7)

  • DIMENSIONS WITH STRAIGHT BLADE

    Height to Top of Cab and Canopy mm (ft)

    Hood Height mm (ft)

    Ground Clearance mm (ft)

    Wheel base mm (ft)

    Overall Length, Blade on Ground mm (ft)

    3,832(12.6)

    3,720(12.2)

    461(1.5)

    3,650(12.0)

    8,280(27.2)

  • BLADE SPECIFICATIONS

    Straight Blade Capacity m3 (cu. Yd)

    Straight Blade Overall Width mm (ft)

    Straight Blade Height mm (ft)

    Straight Blade Digging Depth mm (ft)

    Max. Lift Above Ground mm (ft)

    Straight Blade Max. Tilt mm (ft)

    Straight Blade Weight kg (lb)

    Universal Blade Capacity m3 (cu. Yd)

    Universal Blade Overall Width mm (ft)

    Universal Blade Height mm (ft)

    Universal Blade Digging Depth mm (ft)

    Max. Lift Above Ground mm (ft)

    Universal Blade Max. Tilt mm (ft)

    5.3(6.9)

    4,570(15.0)

    1,345(4.4)

    388(1.3)

    1,020(3.3)

    1,145(3.8)

    3,320(7,319)

    7.5(9.8)

    4,210(13.8)

    1,290(4.2)

    424(1.4)

    1,010(3.3)

    1,120(3.7)

  • WEIGHTS

    Operating Weight kg (lb)

    34,500(76,059)

Enviando formulario...

El servidor ha detectado un error.

Thanks for contact us.

Download without providing email

Download Comparison Chart

REQUEST A QUOTE

PRODUCTS / MACHINES / WHEEL DOZERS

RWD315

ENGINE

Model

Emission (optional)

Cylinders

Displacement L (cu. In)

Net Power kW (Hp)

Net Peak Torque Nm (lb-ft)

Torque Rise

Fuel System

Lubrication

Aspiration

Air Cleaner

Fan Drive

Electrical System

Batteries

Cummins M11 or Rhino

Tier2 (Tier3, Tier4)

6

11(671)

250(335)

1,674(1,235)

47%

Direct Injection

Full-flow spin-on filter

Turbocharged, air cooled

Dual element dry type

Hydraulic driven

24 V 70 Amp

120A

TRANSMISSION

Type

Torque Converter

Operator Interface

Shift Modes

Maximum Travel Speeds

1st Gear km/h (mph)

Powershift

Single-stage, 3-phase

Steering column lever

Manual activation

Forward     Reverse

6.4(4.0)        12(8)

REFILL CAPACITIES

Fuel Tank L (gal)

Cooling System L (gal)

Engine Oil L (gal)

Transmission Fluid L (gal)

Axle Oil  L (gal)

Hydraulic Tank L (gal)

Brake System L (gal)

480(127)

55(15)

32(8.5)

43(11)

51(13)

260(69)

2.0(0.5)

STEERING

Type

Articulation Angle

Turning Radius mm (ft)

Hydraulic Cycle Times

Raise sec.

Dump sec.

Lower sec.

Total sec.

Articulated frame, hydraulic

40 degrees

6,614(21.7)

Z-Bar

6.0

3.4

1.6

11.0

DIMENSIONS

Height to Top of Cab mm (ft)

Hood Height mm (ft)

Ground Clearance mm (ft)

Wheel base mm (ft)

Overall Length mm (ft)

Height to Hinge Pin mm (ft)

Dump Clearance mm (ft)

Reach, Full Height mm (ft)

Reach, 45 degree Dump mm (ft)

Max. Digging Depth mm (ft)

Max. Rollback at Ground Level

Max. Rollback, Boom Fully Raised

Max. Bucket Dump Angle

Loader Clearance Circle, mm (ft)

3,832(12.6)

3,720(12.2)

461(1.5)

3,650(12.0)

9,343(30.7)

4,460(14.6)

3,325(10.9)

1,400(4.6)

2,020(6.6)

250(0.8)

50 degrees

67 degrees

45 degrees

15,022(49.3)

CAPACITIES

Capacity, Heaped m3(cu. Yd)

Capacity, Struck m3(cu. Yd)

Bucket Weight Kg (lb)

Bucket Width mm (ft)

Breakout Force Kg (lb)

Max. Drawbar Force Kg (lb)

Tipping Load, Straight Kg (lb)

Tipping Load Turn Kg (lb)

Operating Weight Kg (lb)

5.1(6.7)

4.4(5.8)

3,100(6,834)

3,500(11.5)

26,400(58,202)

26,900(59,304)

18,000(39,683)

16,500(36,376)

31,500(69,446)