RWL65

PRODUCTS / MACHINES /WHEEL LOADERS

Rhino® Wheel Loaders are today’s solution to meet high performance requirments, have maximum uptime, and low cost operation. Designed to keep you competitive, these loaders let you finish the job faster and put more profit in your pocket.

 

The RWL series allows you to work hard and efficiently in all conditions. Repeatable fine modulation gives superior bucket control with less spillage. RWL Series electro-hydraulic implement controls and load-sensing hydraulic system with simultaneous lift and tilt capabilities offer better control with less effort.

Rhino® wheel loaders saves you money by keeping operating costs to a minimum – getting more work done per unit of fuel used.

Images

Overview

Specifications

Downloads

If you`ve got maximum productivity in mind, the RWL Series Loaders should be at the top of your list. But it`s not just their big torque reserves thet make them such impressive performers. Joystick control provide smooth, near-effortless control. Rhino® hydraulics sense the load and deliver the flow needed for smooth combined functions and fast work cycles.

Control panel provides access to critical machine info, brake and throttle pedals are conveniently positioned for maximum comfort to the operator.

Rhino® cylinders offer superior strength and dent resistance deliver longer component life and reduced risk of system contamination. Rhino® Cylinders and Rods are designed to allow for a variety of service / repair options.

High quality hose products mean fewer hose changes. Rhino® Equipment offers a broad line of high, medium and low-pressure hoses and couplings that are engineered and tested far beyond industry standards for top performance and long life.

  • ENGINE

    Model

    Emission (optional)

    Cylinders

    Displacement L (cu. In)

    Net Power kW (Hp) @ Rated rpm

    Net Peak Torque Nm (lb-ft) @ Rated rpm

    Fuel System

    Lubrication

    Aspiration

    Air Cleaner

    Fan Drive

    Electrical System

    Batteries (2-12 volt)

    Cummins 4BT3 or Rhino®

    Tier2 (Tier3, Tier4)

    4

    3.3(201)

    60(80)@2,200 rpm

    259(191)@2,200 rpm

    Direct Injection

    Full-flow spin-on filter

    Turbocharged

    Under-hood, dual element dry type, restriction indicator on filter housing for service

    Belt driven

    24 Volts with 70 Amp alternator

    120A

  • TRANSMISSION

    Type

    Torque Converter

    Operator Interface

    Shift Modes

    Maximum Travel Speeds (with 16 R 24 tires)

    1st Gear km/h (mph)

    2nd Gear km/h (mph)

    Powershift

    Single-stage, Dual-phase, Quad-element torque

    Steering column lever for two gears forward and one in reverse

    Manual activation (Forward: 1st and 2nd; Reverse: 1st)

    Forward            Reverse

    6(4)                   6(4)

    24(15)

  • AXLES / BRAKES

    Final Drives

    Differentials

    Rear Axel Oscillation (with 16 R 24 tires)

    Service Brakes

    Parking Brake

    Heavy duty inboard-mounted planetary

    Helical bevel gear

    22 degrees (11 degrees each direction)

    Pneumatically assisted, hydraulically actuaded, four wheels disk brake

    Manually activated, drum mounted on front output shaft

  • TIRES / WHEELS

    Tread Width mm (in)            Width Over Tires mm (in)1,600(63.0)                                     2,010(79.1)

    16 R 24 10 Ply

    Pressure Mpa (psi)

    0.3(43)

  • REFILL CAPACITIES

    Fuel Tank L (gal)

    Engine Oil L (gal)

    Transmission Fluid L (gal)

    Axle Oil (Front and Rear, each) L (gal)

    Hydraulic Tank L (gal)

    Brake System (Front and Rear Booster Pump, each) L (gal)

    110(29)

    16(4)

    20(5)

    13(3)

    100(26)

    1.5(0.4)

  • HYDRAULIC SYSTEM / STEERING

    Pump (Loader and Steering)

    Max. Rated Flow at 2,200 rpm L/min (gpm)

    System Relief Pressure (Loader and Steering) Mpa (psi)

    Loader Controls

    Gear Pump, variable displacement, closed-center

    100(26)

    16(2,321)

    Dual-multiway valve, joystick control

  • STEERING

    Type

    Articulation Angle

    Turning Radius (measured to centerline of outside tire) mm (ft)

    Hydraulic Cycle Times

    Raise sec.

    Dump sec.

    Lower sec.

    Total sec.

    Articulated frame, fully hydraulic

    38 degrees

    4,420(14.5)

    Z-Bar

    5.0

    2.0

    3.2

    10.2

  • DIMENSIONS WITH BUCKET

    Height to Top of Cab and Canopy mm (ft)

    Hood Height mm (ft)

    Ground Clearance mm (ft)

    Wheel base mm (ft)

    Overall Length, Bucket on Ground mm (ft)

    Height to Hinge Pin, Fully Raised mm (ft)

    Dump Clearance, 45 degree Full Height mm (ft)

    Reach, 45 degree Dump, Full Height mm (ft)

    Reach, 45 degree Dump, 2,130mm (7ft) Clearance mm (ft)

    Max. Digging Depth mm (ft)

    Max. Rollback at Ground Level

    Max. Rollback, Boom Fully Raised

    Max. Bucket Dump Angle, Fully Raised

    Loader Clearance Circle, Bucket Carry Position mm (ft)

    2,975(9.8)

    2,810(9.2)

    342(1.1)

    2,300(7.5)

    5,710(18.7)

    3,465(11.4)

    2,520(8.3)

    960(3.1)

    1,355(4.4)

    146(0.5)

    49 degrees

    55 degrees

    45 degrees

    10,525(34.5)

  • SPECIFICATIONS WITH BUCKET

    Capacity, Heaped m3(cu. Yd)

    Capacity, Struck m3(cu. Yd)

    Bucket Weight Kg (lb)

    Bucket Width mm (ft)

    Breakout Force Kg (lb)

    Tipping Load, Straight Kg (lb)

    Tipping Load, 35 degree Full Turn Kg (lb)

    Operating Weight Kg (lb)

    1.0(1.3)

    0.75(1.0)

    542(1,195)

    2,070(6.8)

    5,700(12,566)

    6,452(14,224)

    5,560(12,258)

    6,550(14,440)

Enviando formulario...

El servidor ha detectado un error.

Thanks for contact us.

Download without providing email

Download Comparison Chart

REQUEST A QUOTE

PRODUCTS / MACHINES / WHEEL LOADERS

RWL65

ENGINE

Model

Emission (optional)

Cylinders

Displacement L (cu. In)

Power kW (Hp)

Torque Nm (lb-ft)

Fuel System

Lubrication

Aspiration

Air Cleaner

Fan Drive

Electrical System

Batteries

Cummins  4BT3 or Rhino®

Tier2 (Tier3, Tier4)

4

3.3(201)

60(80)@2,200 rpm

259(191)@2,200 rpm

Direct Injection

Full-flow spin-on filter

Turbocharged

Under-hood, dual element

Belt driven

24 V, 70 Amp

120A

TRANSMISSION

Type

Torque Converter

Operator Interface

Shift Modes

Maximum Travel Speeds

1st Gear km/h (mph)

Powershift

Single-stage, Dual-phase

Steering column lever

Manual activation

Forward      Reverse

6(4)              6(4)

REFILL CAPACITIES

Cooling System L (Gal)

Rear Axle L (Gal)

Engine Oil L (Gal)

Transmission L (Gal)

Fuel Tank L (Gal)

Hydraulic System L (Gal)

110(29)

16(4)

20(5)

13(3)

100(26)

1.5(0.4)

STEERING

Type

Articulation Angle

Turning Radius mm (ft)

Hydraulic Cycle Times

Raise sec.

Dump sec.

Lower sec.

Total sec.

Articulated frame, hydraulic

38 degrees

4,420(14.5)

Z-Bar

5.0

2.0

3.2

10.2

DIMENSIONS

Height to Top of Cab mm (ft)

Hood Height mm (ft)

Ground Clearance mm (ft)

Wheel base mm (ft)

Overall Length mm (ft)

Height to Hinge Pin mm (ft)

Dump Clearance mm (ft)

Reach, Full Height mm (ft)

Reach, 45 degree Dump mm (ft)

Max. Digging Depth mm (ft)

Max. Rollback at Ground Level

Max. Rollback, Boom Fully Raised

Max. Bucket Dump Angle

Loader Clearance Circle, mm (ft)

2,975(9.8)

2,810(9.2)

342(1.1)

2,300(7.5)

5,710(18.7)

3,465(11.4)

2,520(8.3)

960(3.1)

1,355(4.4)

146(0.5)

49 degrees

55 degrees

45 degrees

10,525(34.5)

CAPACITIES

Capacity, Heaped m3(cu. Yd)

Capacity, Struck m3(cu. Yd)

Bucket Weight Kg (lb)

Bucket Width mm (ft)

Breakout Force Kg (lb)

Tipping Load, Straight Kg (lb)

Tipping Load Full Turn Kg (lb)

Operating Weight Kg (lb)

1.0(1.3)

0.75(1.0)

542(1,195)

2,070(6.8)

5,700(12,566)

6,452(14,224)

5,560(12,258)

6,550(14,440)

Download without providing email

Download Comparison Chart